Andrie Designs - The Statement Clutch
The Statement Clutch comes in three sizes (small, medium and large), enabling you to make a clutch to suit any and every occasion. It has a simple turn lock closure to keep your belongings safely tucked away inside, and a nicely sized slip pocket inside for your smart phone or keys.
The finished sizes of The Statement Clutch are as follows:
SMALL –
- Width – 11″ (28cm)
- Width at opening – 10″ (25cm)
- Height – 6 1/2″ (16cm)
- Length of wrist strap – 5 1/2″ (14cm)
MEDIUM –
- Width – 12″ (30cm)
- Width at opening – 11″ (28cm)
- Height – 7 1/4″ (18cm)
- Length of wrist strap – 5 1/2″ (14cm)
LARGE –
- Width – 13″ (33cm)
- Width at opening – 12″ (30cm)
- Height – 8″ (20cm)
- Length of wrist strap – 5 1/2″ (14cm)
Materials Required:
- Fabric for the outer of your clutch – ¼ yard (0.25m)
- Fabric for the lining – ¼ yard (0.25m)
- Piece of lace or similar for the flap overlay – 14” x 9” (36cm x 23cm)
- Light-medium weight fusible interfacing (i.e. Pellon Shapeflex SF101, Legacy Shapeflex
- L-SF101) – 5/8yd (0.6m) (based on a 20” (50cm) width)
- Medium-heavy weight fusible interfacing (i.e. Pellon 808, Formfuse 1600) – ½yd (0.5m) (based on a 40” (101cm) width)
- By Annie’s Soft and Stable OR Fusible fleece (i.e. Pellon Thermolam 971F, Vilene H640) – ½yd (0.5m)
- Firm fusible stabilizer for turn lock tab (i.e. Pellon’s Peltex #71F, Legacy #71F) – 3” x 5” (8cm x 13cm)
- Turn Lock x 1 (larger size is best)
- D-Ring x 1 for optional wrist strap – ¾” (19mm) size
- Swivel hook x 1 for optional wrist strap – 5/8” (16mm size)
- Fabric tape or glue
- Coordinating thread, scissors and general sewing supplies.