Skip Navigation Website Accessibility
 


Andrie Designs - The Statement Clutch

The Statement Clutch comes in three sizes (small, medium and large), enabling you to make a clutch to suit any and every occasion. It has a simple turn lock closure to keep your belongings safely tucked away inside, and a nicely sized slip pocket inside for your smart phone or keys.

The finished sizes of The Statement Clutch are as follows:

SMALL –

  • Width – 11″ (28cm)
  • Width at opening – 10″ (25cm)
  • Height – 6 1/2″ (16cm)
  • Length of wrist strap – 5 1/2″ (14cm)

MEDIUM –

  • Width – 12″ (30cm)
  • Width at opening – 11″ (28cm)
  • Height – 7 1/4″ (18cm)
  • Length of wrist strap – 5 1/2″ (14cm)

LARGE –

  • Width – 13″ (33cm)
  • Width at opening – 12″ (30cm)
  • Height – 8″ (20cm)
  • Length of wrist strap – 5 1/2″ (14cm)

Materials Required:

  • Fabric for the outer of your clutch – ¼ yard (0.25m)
  • Fabric for the lining – ¼ yard (0.25m)
  • Piece of lace or similar for the flap overlay – 14” x 9” (36cm x 23cm)
  • Light-medium weight fusible interfacing (i.e. Pellon Shapeflex SF101, Legacy Shapeflex
  • L-SF101) – 5/8yd (0.6m) (based on a 20” (50cm) width)
  • Medium-heavy weight fusible interfacing (i.e. Pellon 808, Formfuse 1600) – ½yd (0.5m) (based on a 40” (101cm) width)
  • By Annie’s Soft and Stable OR Fusible fleece (i.e. Pellon Thermolam 971F, Vilene H640) – ½yd (0.5m)
  • Firm fusible stabilizer for turn lock tab (i.e. Pellon’s Peltex #71F, Legacy #71F) – 3” x 5” (8cm x 13cm)
  • Turn Lock x 1 (larger size is best)
  • D-Ring x 1 for optional wrist strap – ¾” (19mm) size
  • Swivel hook x 1 for optional wrist strap – 5/8” (16mm size)
  • Fabric tape or glue
  • Coordinating thread, scissors and general sewing supplies.